Features
• Control pendant (IP 65-type of enclosure) is connected via a control cable.
• Standard power cable has a length of 1.0 m and is fitted with a CE connector plug (or a Schuko-plug).
•42 V low-voltage control.
• Ergonomic, fitted carrying handle features a comfortable plastic grip.
• Mounting feet fixed on the housing for easy set up.
• Standard operating voltages of 400 V, 3-ph, 50 Hz or 230 V, 1-ph, 50 Hz.
• Galvanized, high-density steel rope is 10 m long (dia. 6.5 mm) and features a safety hook on one end as well as a rounded, plastic-coated tip at the loose end.
• Two spring buffers with adjusting rings can be attached to the wire rope to set the limit switches for both upward and downward movement.
• Drive sheave is made of especially hardened steel designed to ensure long service life.
• The patented (German Patent DE 10 2012 100 099) bi-directional actuator ensures the rope is safely guided and securely held in place.
• Slip clutch is located outside of the load path for added safety.
• Limit switches ensure safe cut-out for the upper and lower hook positions.
• Electromagnetic brake holds the load safely, even in the event of a power failure.
• Winch is classified up to 1 Bm/M3 acc. to FEM/ISO.
• Winch is protected up to IP 55.

Options
• The transport and carrying frames are designed to protect the housing. They must not be used as load-bearing components!
• Two-part reeving configuration doubles the load capacity.
• Additional hook kit for bi-directional lifting.
• Special voltages on request.
• Steel wire ropes of various lengths.
• Manual and electric trolleys.
• Frequency converter for variable speed control or smooth starting.
• Operating hours counter to determine the remaining service life and number of switching operations.
• Radio remote control with extended operation range.
• Varying lengths for power and control cables.
• Stainless steel wire ropes (with shorter service life than standard)