Skip to main content
Find a contact

LaserGuard™ Mini

Collision Avoidance Systems

Get your crane up and running quickly with the LaserGuard™ Mini. This simple-to-install system allows you to program distances directly on the laser or with a PC application.

LaserGuard™ Mini Manual 147-20127 R0

Features & Benefits

Magnetek's LaserGuard™ Mini features a compact laser sensor with DIN-mounted power circuit for easy installation in a wide range of AC and DC applications. With a 2 distance set-point sensor (typically slowdown and stop), LaserGuard Mini can help prevent crane-to-crane and crane-to-wall collisions.

FEATURES and BENEFITS:

  • 8 in. to 164 ft. (0.2-50 m) detection range*
  • Laser sensor (IP65)**
  • 85-264 VAC and 120-370 VDC
  • Pushbutton programming for easy configuration
  • 2 distance set-points, each with a relay contact
  • Visible laser light allows for easy alignment and quick setup
  • Status LEDs for seamless troubleshooting and diagnostics
  • cULus Compliance: UL 508
  • CE Directives: None

*Runway length may be greater than detection range
**Not recommended for outdoor applications

MODEL NUMBERING

  • LGM = LaserGuard Mini
  • OPEN= Open Chassis, No Enclosure
  • 4X= NEMA 4X Enclosure
  • R= Rigid Laser Sensor Mount
  • H= Hinged Laser Sensor Mount
  • 10 = 10-Meter Laser Sensor Cabling
  • 25 = 25-Meter Laser Sensor Cabling
  • 40 = 40-Meter Laser Sensor Cabling
  • 75 = 75-Meter Laser Sensor Cabling

 

SYSTEM INCLUDES

  • Laser Sensor***
  • Laser Sensor Mounting Bracket***
  • Sensor Cable***
  • DIN-Mount Power Circuit***
  • 2 x 2 ft (0.6 x 0.6 m) Reflector

***NEMA 4X configuration contains these components inside the enclosure

COLLISION AVOIDANCE COMPARISON CHART

FEATURES ReFlx 45 LaserGuard Mini LaserGuard2
Distance* 3-45 ft. (0.9-13.7 m) 8 in.-164 ft. (0.2-5.0 m) 8 in-150 ft. (0.2-45.7 m)
Sensor Rating** IP67 IP65 IP65
Voltage Rating 12-240 VAC/VDC 85-264 VAC, 120-370 VDC 85-264 VAC, 120-370 VDC or 9-36 VDC (Optional)
Components Sensor, 2x2 ft. reflector, sensor bracket Laser, mounting bracket, DIN-mount power circuit, 2x2 ft. reflector, sensor cable Laser support unit, 2x2 ft. reflector, laser, mounting bracket, sensor cable
Certifications cULus cULus None
Distance Set Points One Two Three
Diagnostic Indicators LEDs for power and status LEDs for power and status LEDs for power and status
Options DIN-mount reflector NEMA 4X configuration NEMA 4X configuration

* Runway length may be greater than detection range.
** System may not operate properly in direct sunlight or inclement weather conditions.