CM Quick Connect Hooks are the quickest and easiest way to add hooks to any synthetic sling by eliminating the need for additional hardware or assembly tools. Simply open the latch, slide in the sling, close the latch and put the sling into position - it's that easy.
Designed with a large bearing surface, these hooks prevent the sling from bunching, allowing the sling to be used at full capacity.
By eliminating the need for additional hardware or oversized components to prevent bunching, the weight savings synthetic slings provide will be maintained. Quick Connect Hooks allow for quick sling-to-load connection without relying on a choker or basket hitch, thus eliminating the need for longer, more expensive slings.
Hooks are color coded to match common synthetic sling capacities. Working load limits are also forged into the hook for easy reference. (NOTE: Always refer to the synthetic sling tag and Quick Connect Hook for working load limit of the assembly.)
Smooth, flat bearing surface prevents abrasive synthetic sling damage. Hook design also protects the sling, eliminating wear caused by sharp load edges and the need for additional edge protection.
Hook eye is designed with a recessed area to ensure the sling stays in place. Sling will not come out of the eye unless purposely removed.
Forged for optimum strength and durability. Each hook is individually proof tested to 2x the working load limit.
Uses same latches as standard CM Clevlok® sling hooks.
Embossed for worldwide use
Made in the USA
WLL: 2,750 to 14,200 lbs.
Sizes: 1/4 to 5/8 in.
WLL: 2,750 to 14,200 lbs.
Sizes: 1/4 to 5/8 in.
North America - EN
