Skip to main content
How to Buy

SCN03 Series - 3 Ton

Heavy Duty Electric Linear Actuators excel in precision and position feedback, allowing for accurate control over speed, acceleration, and force. Eliminating the need for hydraulic fluids, reducing the risk of leaks make them suitable for clean environments. They are known for high efficiency, which translates to lower energy consumption and operating costs.

Free Application Analysis

Standard Configurations

Screw Drive Type: Ball
Stroke Length (in): 6, 12, 18, 24, 36
View Specifications

Documents

Product Sheet
O&M Manual
Browse All Documents

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features and Benefits

  • Easy to Install, Reducing Installation Costs
    Easy installation is a significant benefit of electric linear actuators, especially compared to hydraulic or pneumatic systems. Electric linear actuators are generally self-contained units with a motor, gears, and a leadscrew.
  • Low Maintenance Design
    Easy to maintain after installation
  • Ball Screw Type
    Ball Screws, with their recirculating ball bearings, offer higher efficiency, precision, and speed capabilities, making them suitable for demanding applications. 
  • Superior Strength and Durability
    Ductile iron housing exhibits significantly higher tensile strength and yield strength than traditional cast iron. This makes it more resistant to external loads, impacts, and stress, leading to a longer service life.
  • Ductile Iron Housing
    Ductile iron offers significantly higher tensile strength compared to traditional cast iron, making it well-suited for high-stress applications.
  • Adjustable End of Stroke Limit Switches
    Define the exact stroke length needed for their application, even if it's shorter than the actuator's maximum stroke.
  • Mounting Options

    Clevis Mounting, allows the actuator to pivot freely, making it suitable for applications where the actuator needs to change its angle during operation (e.g., opening and closing hatches).

    Trunnion Mounting, customized mounting blocks that attach to the outer tube of the actuator (front, rear, or intermediate positions). These mounts provide a pivot point around which the actuator can rotate.

  • Parallel, Right Angle and Offset Motor Configurations

    Parallel Configuration, positioned parallel to the leadscrew provide shorter overall length compared to inline actuators, balanced overall width and length, are suitable for applications with limited length and width space.

    Right Angle Configuration, the motor is placed perpendicular to the leadscrew provides quiet operation, has excellent backdrive performance.

    Offset Configuration, can be mounted in a way that creates an "offset" from a straight or center line provides advantages in terms of reduced overall length, a balanced form factor, improved design flexibility and a wider range of gear ratio options, making it suitable for applications with space limitations and requiring flexibility in speed and torque control.

  • Custom Solutions
    Available with experienced Application Engineering Team

Optional Features

  • Food grade component options available
  • Explosion proof motor and limit switch
  • Product designs for outdoor applications
  • Manual override
  • Other special packages are available upon your application needs

Hazardous Rated Model Options 

  • Motor rated for Class 1, Group D and Class 2, Groups F & G
  • Limit switches rated for NEMA 7/Class 1, Group D or NEMA 9/Class 2, Groups E, F & G.

Specifications

    • Model Number Capacity (lbs) Lifting Speed at Rated Load (in/s) Limit Switch Motor (HP) Motor Position Potentiometer Stroke Length (in) Translating Tube Material
      NL03-0358-06 3.27 Included 1.5 Right Angle Optional 6 Hard Chrome Plated
      NL03-0358-12 3.27 Included 1.5 Right Angle Optional 12 Hard Chrome Plated
      NL03-0358-18 3.27 Included 1.5 Right Angle Optional 18 Hard Chrome Plated
      NL03-0358-24 3.27 Included 1.5 Right Angle Optional 24 Hard Chrome Plated
      NL03-0358-36 3.27 Included 1.5 Right Angle Optional 36 Hard Chrome Plated
      NL03-0397-06 2.95 Included 1.5 Right Angle Optional 6 Hard Chrome Plated
      NL03-0397-12 2.95 Included 1.5 Right Angle Optional 12 Hard Chrome Plated
      NL03-0397-18 2.95 Included 1.5 Right Angle Optional 18 Hard Chrome Plated
      NL03-0397-24 2.95 Included 1.5 Right Angle Optional 24 Hard Chrome Plated
      NL03-0397-36 2.95 Included 1.5 Right Angle Optional 36 Hard Chrome Plated
      NL03-0517-06 2.26 Included 1 Right Angle Optional 6 Hard Chrome Plated
      NL03-0517-12 2.26 Included 1 Right Angle Optional 12 Hard Chrome Plated
      NL03-0517-18 2.26 Included 1 Right Angle Optional 18 Hard Chrome Plated
      NL03-0517-24 2.26 Included 1 Right Angle Optional 24 Hard Chrome Plated
      NL03-0517-36 2.26 Included 1 Right Angle Optional 36 Hard Chrome Plated
      NL03-0583-06 2.01 Included 1 Right Angle Optional 6 Hard Chrome Plated
      NL03-0583-12 2.01 Included 1 Right Angle Optional 12 Hard Chrome Plated
      NL03-0583-18 2.01 Included 1 Right Angle Optional 18 Hard Chrome Plated
      NL03-0583-24 2.01 Included 1 Right Angle Optional 24 Hard Chrome Plated
      NL03-0583-36 2.01 Included 1 Right Angle Optional 36 Hard Chrome Plated
      NL03-1111-06 1.05 Included 0.5 Right Angle Optional 6 Hard Chrome Plated
      NL03-1111-12 1.05 Included 0.5 Right Angle Optional 12 Hard Chrome Plated
      NL03-1111-18 1.05 Included 0.5 Right Angle Optional 18 Hard Chrome Plated
      NL03-1111-24 1.05 Included 0.5 Right Angle Optional 24 Hard Chrome Plated
      NL03-1111-36 1.05 Included 0.5 Right Angle Optional 36 Hard Chrome Plated
      NU03-0572-06 2.05 Included 1 Parallel Optional 6 Hard Chrome Plated
      NU03-0572-12 2.05 Included 1 Parallel Optional 12 Hard Chrome Plated
      NU03-0572-18 2.05 Included 1 Parallel Optional 18 Hard Chrome Plated
      NU03-0572-24 2.05 Included 1 Parallel Optional 24 Hard Chrome Plated
      NU03-0572-36 2.05 Included 1 Parallel Optional 36 Hard Chrome Plated
      NU03-1181-06 0.99 Included 0.5 Parallel Optional 6 Hard Chrome Plated
      NU03-1181-12 0.99 Included 0.5 Parallel Optional 12 Hard Chrome Plated
      NU03-1181-18 0.99 Included 0.5 Parallel Optional 18 Hard Chrome Plated
      NU03-1181-24 0.99 Included 0.5 Parallel Optional 24 Hard Chrome Plated
      NU03-1181-36 0.99 Included 0.5 Parallel Optional 36 Hard Chrome Plated
      NZ03-0424-06 2.76 Included 1 Offset Optional 6 Hard Chrome Plated
      NZ03-0424-12 2.76 Included 1 Offset Optional 12 Hard Chrome Plated
      NZ03-0424-18 2.76 Included 1 Offset Optional 18 Hard Chrome Plated
      NZ03-0424-24 2.76 Included 1 Offset Optional 24 Hard Chrome Plated
      NZ03-0424-36 2.76 Included 1 Offset Optional 36 Hard Chrome Plated
      NZ03-0534-06 2.19 Included 1 Offset Optional 6 Hard Chrome Plated
      NZ03-0534-12 2.19 Included 1 Offset Optional 12 Hard Chrome Plated
      NZ03-0534-18 2.19 Included 1 Offset Optional 18 Hard Chrome Plated
      NZ03-0534-24 2.19 Included 1 Offset Optional 24 Hard Chrome Plated
      NZ03-0534-36 2.19 Included 1 Offset Optional 36 Hard Chrome Plated
      NZ03-1166-06 1 Included 0.5 Offset Optional 6 Hard Chrome Plated
      NZ03-1166-12 1 Included 0.5 Offset Optional 12 Hard Chrome Plated
      NZ03-1166-18 1 Included 0.5 Offset Optional 18 Hard Chrome Plated
      NZ03-1166-24 1 Included 0.5 Offset Optional 24 Hard Chrome Plated
      NZ03-1166-36 1 Included 0.5 Offset Optional 36 Hard Chrome Plated
    • Model Number Capacity (lbs) Lifting Speed at Rated Load (in/s) Limit Switch Motor (HP) Motor Position Potentiometer Stroke Length (in) Translating Tube Material
      NL03-0465-06 2.52 Included 1.5 Right Angle Optional 6 Hard Chrome Plated
      NL03-0465-12 2.52 Included 1.5 Right Angle Optional 12 Hard Chrome Plated
      NL03-0465-18 2.52 Included 1.5 Right Angle Optional 18 Hard Chrome Plated
      NL03-0465-24 2.52 Included 1.5 Right Angle Optional 24 Hard Chrome Plated
      NL03-0465-36 2.52 Included 1.5 Right Angle Optional 36 Hard Chrome Plated
      NL03-0667-06 1.76 Included 1 Right Angle Optional 6 Hard Chrome Plated
      NL03-0667-12 1.76 Included 1 Right Angle Optional 12 Hard Chrome Plated
      NL03-0667-18 1.76 Included 1 Right Angle Optional 18 Hard Chrome Plated
      NL03-0667-24 1.76 Included 1 Right Angle Optional 24 Hard Chrome Plated
      NL03-0667-36 1.76 Included 1 Right Angle Optional 36 Hard Chrome Plated
      NL03-0758-06 1.54 Included 1 Right Angle Optional 6 Hard Chrome Plated
      NL03-0758-12 1.54 Included 1 Right Angle Optional 12 Hard Chrome Plated
      NL03-0758-18 1.54 Included 1 Right Angle Optional 18 Hard Chrome Plated
      NL03-0758-24 1.54 Included 1 Right Angle Optional 24 Hard Chrome Plated
      NL03-0758-36 1.54 Included 1 Right Angle Optional 36 Hard Chrome Plated
      NL03-0867-06 1.35 Included 0.75 Right Angle Optional 6 Hard Chrome Plated
      NL03-0867-12 1.35 Included 0.75 Right Angle Optional 12 Hard Chrome Plated
      NL03-0867-18 1.35 Included 0.75 Right Angle Optional 18 Hard Chrome Plated
      NL03-0867-24 1.35 Included 0.75 Right Angle Optional 24 Hard Chrome Plated
      NL03-0867-36 1.35 Included 0.75 Right Angle Optional 36 Hard Chrome Plated
      NL03-0985-06 1.19 Included 0.75 Right Angle Optional 6 Hard Chrome Plated
      NL03-0985-12 1.19 Included 0.75 Right Angle Optional 12 Hard Chrome Plated
      NL03-0985-18 1.19 Included 0.75 Right Angle Optional 18 Hard Chrome Plated
      NL03-0985-24 1.19 Included 0.75 Right Angle Optional 24 Hard Chrome Plated
      NL03-0985-36 1.19 Included 0.75 Right Angle Optional 36 Hard Chrome Plated
      NL03-1278-06 0.92 Included 0.5 Right Angle Optional 6 Hard Chrome Plated
      NL03-1278-12 0.92 Included 0.5 Right Angle Optional 12 Hard Chrome Plated
      NL03-1278-18 0.92 Included 0.5 Right Angle Optional 18 Hard Chrome Plated
      NL03-1278-24 0.92 Included 0.5 Right Angle Optional 24 Hard Chrome Plated
      NL03-1278-36 0.92 Included 0.5 Right Angle Optional 36 Hard Chrome Plated
      NL03-1600-06 0.73 Included 0.5 Right Angle Optional 6 Hard Chrome Plated
      NL03-1600-12 0.73 Included 0.5 Right Angle Optional 12 Hard Chrome Plated
      NL03-1600-18 0.73 Included 0.5 Right Angle Optional 18 Hard Chrome Plated
      NL03-1600-24 0.73 Included 0.5 Right Angle Optional 24 Hard Chrome Plated
      NL03-1600-36 0.73 Included 0.5 Right Angle Optional 36 Hard Chrome Plated
      NL03-1852-06 0.63 Included 0.33 Right Angle Optional 6 Hard Chrome Plated
      NL03-1852-12 0.63 Included 0.33 Right Angle Optional 12 Hard Chrome Plated
      NL03-1852-18 0.63 Included 0.33 Right Angle Optional 18 Hard Chrome Plated
      NL03-1852-24 0.63 Included 0.33 Right Angle Optional 24 Hard Chrome Plated
      NL03-1852-36 0.63 Included 0.33 Right Angle Optional 36 Hard Chrome Plated
      NL03-2080-06 0.56 Included 0.33 Right Angle Optional 6 Hard Chrome Plated
      NL03-2080-12 0.56 Included 0.33 Right Angle Optional 12 Hard Chrome Plated
      NL03-2080-18 0.56 Included 0.33 Right Angle Optional 18 Hard Chrome Plated
      NL03-2080-24 0.56 Included 0.33 Right Angle Optional 24 Hard Chrome Plated
      NL03-2080-36 0.56 Included 0.33 Right Angle Optional 36 Hard Chrome Plated
      NL03-2407-06 0.49 Included 0.33 Right Angle Optional 6 Hard Chrome Plated
      NL03-2407-12 0.49 Included 0.33 Right Angle Optional 12 Hard Chrome Plated
      NL03-2407-18 0.49 Included 0.33 Right Angle Optional 18 Hard Chrome Plated
      NL03-2407-24 0.49 Included 0.33 Right Angle Optional 24 Hard Chrome Plated
      NL03-2407-36 0.49 Included 0.33 Right Angle Optional 36 Hard Chrome Plated
      NL03-2716-06 0.43 Included 0.25 Right Angle Optional 6 Hard Chrome Plated
      NL03-2716-12 0.43 Included 0.25 Right Angle Optional 12 Hard Chrome Plated
      NL03-2716-18 0.43 Included 0.25 Right Angle Optional 18 Hard Chrome Plated
      NL03-2716-24 0.43 Included 0.25 Right Angle Optional 24 Hard Chrome Plated
      NL03-2716-36 0.43 Included 0.25 Right Angle Optional 36 Hard Chrome Plated
      NL03-3157-06 0.37 Included 0.25 Right Angle Optional 6 Hard Chrome Plated
      NL03-3157-12 0.37 Included 0.25 Right Angle Optional 12 Hard Chrome Plated
      NL03-3157-18 0.37 Included 0.25 Right Angle Optional 18 Hard Chrome Plated
      NL03-3157-24 0.37 Included 0.25 Right Angle Optional 24 Hard Chrome Plated
      NL03-3157-36 0.37 Included 0.25 Right Angle Optional 36 Hard Chrome Plated
      NL03-3562-06 0.33 Included 0.25 Right Angle Optional 6 Hard Chrome Plated
      NL03-3562-12 0.33 Included 0.25 Right Angle Optional 12 Hard Chrome Plated
      NL03-3562-18 0.33 Included 0.25 Right Angle Optional 18 Hard Chrome Plated
      NL03-3562-24 0.33 Included 0.25 Right Angle Optional 24 Hard Chrome Plated
      NL03-3562-36 0.33 Included 0.25 Right Angle Optional 36 Hard Chrome Plated
      NL03-5378-06 0.22 Included 0.16 Right Angle Optional 6 Hard Chrome Plated
      NL03-5378-12 0.22 Included 0.16 Right Angle Optional 12 Hard Chrome Plated
      NL03-5378-18 0.22 Included 0.16 Right Angle Optional 18 Hard Chrome Plated
      NL03-5378-24 0.22 Included 0.16 Right Angle Optional 24 Hard Chrome Plated
      NL03-5378-36 0.22 Included 0.16 Right Angle Optional 36 Hard Chrome Plated
      NL03-6188-06 0.19 Included 0.16 Right Angle Optional 6 Hard Chrome Plated
      NL03-6188-12 0.19 Included 0.16 Right Angle Optional 12 Hard Chrome Plated
      NL03-6188-18 0.19 Included 0.16 Right Angle Optional 18 Hard Chrome Plated
      NL03-6188-24 0.19 Included 0.16 Right Angle Optional 24 Hard Chrome Plated
      NL03-6188-36 0.19 Included 0.16 Right Angle Optional 36 Hard Chrome Plated
      NU03-0451-06 2.6 Included 1.5 Parallel Optional 6 Hard Chrome Plated
      NU03-0451-12 2.6 Included 1.5 Parallel Optional 12 Hard Chrome Plated
      NU03-0451-18 2.6 Included 1.5 Parallel Optional 18 Hard Chrome Plated
      NU03-0451-24 2.6 Included 1.5 Parallel Optional 24 Hard Chrome Plated
      NU03-0451-36 2.6 Included 1.5 Parallel Optional 36 Hard Chrome Plated
      NU03-0643-06 1.82 Included 1 Parallel Optional 6 Hard Chrome Plated
      NU03-0643-12 1.82 Included 1 Parallel Optional 12 Hard Chrome Plated
      NU03-0643-18 1.82 Included 1 Parallel Optional 18 Hard Chrome Plated
      NU03-0643-24 1.82 Included 1 Parallel Optional 24 Hard Chrome Plated
      NU03-0643-36 1.82 Included 1 Parallel Optional 36 Hard Chrome Plated
      NU03-0748-06 1.57 Included 1 Parallel Optional 6 Hard Chrome Plated
      NU03-0748-12 1.57 Included 1 Parallel Optional 12 Hard Chrome Plated
      NU03-0748-18 1.57 Included 1 Parallel Optional 18 Hard Chrome Plated
      NU03-0748-24 1.57 Included 1 Parallel Optional 24 Hard Chrome Plated
      NU03-0748-36 1.57 Included 1 Parallel Optional 36 Hard Chrome Plated
      NU03-0837-06 1.4 Included 0.75 Parallel Optional 6 Hard Chrome Plated
      NU03-0837-12 1.4 Included 0.75 Parallel Optional 12 Hard Chrome Plated
      NU03-0837-18 1.4 Included 0.75 Parallel Optional 18 Hard Chrome Plated
      NU03-0837-24 1.4 Included 0.75 Parallel Optional 24 Hard Chrome Plated
      NU03-0837-36 1.4 Included 0.75 Parallel Optional 36 Hard Chrome Plated
      NU03-0903-06 1.3 Included 0.75 Parallel Optional 6 Hard Chrome Plated
      NU03-0903-12 1.3 Included 0.75 Parallel Optional 12 Hard Chrome Plated
      NU03-0903-18 1.3 Included 0.75 Parallel Optional 18 Hard Chrome Plated
      NU03-0903-24 1.3 Included 0.75 Parallel Optional 24 Hard Chrome Plated
      NU03-0903-36 1.3 Included 0.75 Parallel Optional 36 Hard Chrome Plated
      NU03-1015-06 1.15 Included 0.75 Parallel Optional 6 Hard Chrome Plated
      NU03-1015-12 1.15 Included 0.75 Parallel Optional 12 Hard Chrome Plated
      NU03-1015-18 1.15 Included 0.75 Parallel Optional 18 Hard Chrome Plated
      NU03-1015-24 1.15 Included 0.75 Parallel Optional 24 Hard Chrome Plated
      NU03-1015-36 1.15 Included 0.75 Parallel Optional 36 Hard Chrome Plated
      NU03-1323-06 0.89 Included 0.5 Parallel Optional 6 Hard Chrome Plated
      NU03-1323-12 0.89 Included 0.5 Parallel Optional 12 Hard Chrome Plated
      NU03-1323-18 0.89 Included 0.5 Parallel Optional 18 Hard Chrome Plated
      NU03-1323-24 0.89 Included 0.5 Parallel Optional 24 Hard Chrome Plated
      NU03-1323-36 0.89 Included 0.5 Parallel Optional 36 Hard Chrome Plated
      NU03-1653-06 0.71 Included 0.5 Parallel Optional 6 Hard Chrome Plated
      NU03-1653-12 0.71 Included 0.5 Parallel Optional 12 Hard Chrome Plated
      NU03-1653-18 0.71 Included 0.5 Parallel Optional 18 Hard Chrome Plated
      NU03-1653-24 0.71 Included 0.5 Parallel Optional 24 Hard Chrome Plated
      NU03-1653-36 0.71 Included 0.5 Parallel Optional 36 Hard Chrome Plated
      NU03-1851-06 0.63 Included 0.33 Parallel Optional 6 Hard Chrome Plated
      NU03-1851-12 0.63 Included 0.33 Parallel Optional 12 Hard Chrome Plated
      NU03-1851-18 0.63 Included 0.33 Parallel Optional 18 Hard Chrome Plated
      NU03-1851-24 0.63 Included 0.33 Parallel Optional 24 Hard Chrome Plated
      NU03-1851-36 0.63 Included 0.33 Parallel Optional 36 Hard Chrome Plated
      NU03-2190-06 0.54 Included 0.33 Parallel Optional 6 Hard Chrome Plated
      NU03-2190-12 0.54 Included 0.33 Parallel Optional 12 Hard Chrome Plated
      NU03-2190-18 0.54 Included 0.33 Parallel Optional 18 Hard Chrome Plated
      NU03-2190-24 0.54 Included 0.33 Parallel Optional 24 Hard Chrome Plated
      NU03-2190-36 0.54 Included 0.33 Parallel Optional 36 Hard Chrome Plated
      NU03-2396-06 0.49 Included 0.33 Parallel Optional 6 Hard Chrome Plated
      NU03-2396-12 0.49 Included 0.33 Parallel Optional 12 Hard Chrome Plated
      NU03-2396-18 0.49 Included 0.33 Parallel Optional 18 Hard Chrome Plated
      NU03-2396-24 0.49 Included 0.33 Parallel Optional 24 Hard Chrome Plated
      NU03-2396-36 0.49 Included 0.33 Parallel Optional 36 Hard Chrome Plated
      NU03-2497-06 0.47 Included 0.33 Parallel Optional 6 Hard Chrome Plated
      NU03-2497-12 0.47 Included 0.33 Parallel Optional 12 Hard Chrome Plated
      NU03-2497-18 0.47 Included 0.33 Parallel Optional 18 Hard Chrome Plated
      NU03-2497-24 0.47 Included 0.33 Parallel Optional 24 Hard Chrome Plated
      NU03-2497-36 0.47 Included 0.33 Parallel Optional 36 Hard Chrome Plated
      NU03-2683-06 0.44 Included 0.25 Parallel Optional 6 Hard Chrome Plated
      NU03-2683-12 0.44 Included 0.25 Parallel Optional 12 Hard Chrome Plated
      NU03-2683-18 0.44 Included 0.25 Parallel Optional 18 Hard Chrome Plated
      NU03-2683-24 0.44 Included 0.25 Parallel Optional 24 Hard Chrome Plated
      NU03-2683-36 0.44 Included 0.25 Parallel Optional 36 Hard Chrome Plated
      NU03-2965-06 0.4 Included 0.25 Parallel Optional 6 Hard Chrome Plated
      NU03-2965-12 0.4 Included 0.25 Parallel Optional 12 Hard Chrome Plated
      NU03-2965-18 0.4 Included 0.25 Parallel Optional 18 Hard Chrome Plated
      NU03-2965-24 0.4 Included 0.25 Parallel Optional 24 Hard Chrome Plated
      NU03-2965-36 0.4 Included 0.25 Parallel Optional 36 Hard Chrome Plated
      NU03-3123-06 0.38 Included 0.25 Parallel Optional 6 Hard Chrome Plated
      NU03-3123-12 0.38 Included 0.25 Parallel Optional 12 Hard Chrome Plated
      NU03-3123-18 0.38 Included 0.25 Parallel Optional 18 Hard Chrome Plated
      NU03-3123-24 0.38 Included 0.25 Parallel Optional 24 Hard Chrome Plated
      NU03-3123-36 0.38 Included 0.25 Parallel Optional 36 Hard Chrome Plated
      NU03-3654-06 0.32 Included 0.25 Parallel Optional 6 Hard Chrome Plated
      NU03-3654-12 0.32 Included 0.25 Parallel Optional 12 Hard Chrome Plated
      NU03-3654-18 0.32 Included 0.25 Parallel Optional 18 Hard Chrome Plated
      NU03-3654-24 0.32 Included 0.25 Parallel Optional 24 Hard Chrome Plated
      NU03-3654-36 0.32 Included 0.25 Parallel Optional 36 Hard Chrome Plated
      NU03-3718-06 0.32 Included 0.25 Parallel Optional 6 Hard Chrome Plated
      NU03-3718-12 0.32 Included 0.25 Parallel Optional 12 Hard Chrome Plated
      NU03-3718-18 0.32 Included 0.25 Parallel Optional 18 Hard Chrome Plated
      NU03-3718-24 0.32 Included 0.25 Parallel Optional 24 Hard Chrome Plated
      NU03-3718-36 0.32 Included 0.25 Parallel Optional 36 Hard Chrome Plated
      NU03-4511-06 0.26 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-4511-12 0.26 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-4511-18 0.26 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-4511-24 0.26 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-4511-36 0.26 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NU03-5396-06 0.22 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-5396-12 0.22 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-5396-18 0.22 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-5396-24 0.22 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-5396-36 0.22 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NZ03-0635-06 1.84 Included 1 Offset Optional 6 Hard Chrome Plated
      NZ03-0635-12 1.84 Included 1 Offset Optional 12 Hard Chrome Plated
      NZ03-0635-18 1.84 Included 1 Offset Optional 18 Hard Chrome Plated
      NZ03-0635-24 1.84 Included 1 Offset Optional 24 Hard Chrome Plated
      NZ03-0635-36 1.84 Included 1 Offset Optional 36 Hard Chrome Plated
      NZ03-0726-06 1.61 Included 1 Offset Optional 6 Hard Chrome Plated
      NZ03-0726-12 1.61 Included 1 Offset Optional 12 Hard Chrome Plated
      NZ03-0726-18 1.61 Included 1 Offset Optional 18 Hard Chrome Plated
      NZ03-0726-24 1.61 Included 1 Offset Optional 24 Hard Chrome Plated
      NZ03-0726-36 1.61 Included 1 Offset Optional 36 Hard Chrome Plated
      NZ03-0864-06 1.35 Included 0.75 Offset Optional 6 Hard Chrome Plated
      NZ03-0864-12 1.35 Included 0.75 Offset Optional 12 Hard Chrome Plated
      NZ03-0864-18 1.35 Included 0.75 Offset Optional 18 Hard Chrome Plated
      NZ03-0864-24 1.35 Included 0.75 Offset Optional 24 Hard Chrome Plated
      NZ03-0864-36 1.35 Included 0.75 Offset Optional 36 Hard Chrome Plated
      NZ03-0949-06 1.23 Included 0.75 Offset Optional 6 Hard Chrome Plated
      NZ03-0949-12 1.23 Included 0.75 Offset Optional 12 Hard Chrome Plated
      NZ03-0949-18 1.23 Included 0.75 Offset Optional 18 Hard Chrome Plated
      NZ03-0949-24 1.23 Included 0.75 Offset Optional 24 Hard Chrome Plated
      NZ03-0949-36 1.23 Included 0.75 Offset Optional 36 Hard Chrome Plated
      NZ03-1384-06 0.85 Included 0.5 Offset Optional 6 Hard Chrome Plated
      NZ03-1384-12 0.85 Included 0.5 Offset Optional 12 Hard Chrome Plated
      NZ03-1384-18 0.85 Included 0.5 Offset Optional 18 Hard Chrome Plated
      NZ03-1384-24 0.85 Included 0.5 Offset Optional 24 Hard Chrome Plated
      NZ03-1384-36 0.85 Included 0.5 Offset Optional 36 Hard Chrome Plated
      NZ03-1492-06 0.78 Included 0.5 Offset Optional 6 Hard Chrome Plated
      NZ03-1492-12 0.78 Included 0.5 Offset Optional 12 Hard Chrome Plated
      NZ03-1492-18 0.78 Included 0.5 Offset Optional 18 Hard Chrome Plated
      NZ03-1492-24 0.78 Included 0.5 Offset Optional 24 Hard Chrome Plated
      NZ03-1492-36 0.78 Included 0.5 Offset Optional 36 Hard Chrome Plated
      NZ03-1653-06 0.71 Included 0.5 Offset Optional 6 Hard Chrome Plated
      NZ03-1653-12 0.71 Included 0.5 Offset Optional 12 Hard Chrome Plated
      NZ03-1653-18 0.71 Included 0.5 Offset Optional 18 Hard Chrome Plated
      NZ03-1653-24 0.71 Included 0.5 Offset Optional 24 Hard Chrome Plated
      NZ03-1653-36 0.71 Included 0.5 Offset Optional 36 Hard Chrome Plated
      NZ03-1879-06 0.62 Included 0.5 Offset Optional 6 Hard Chrome Plated
      NZ03-1879-12 0.62 Included 0.5 Offset Optional 12 Hard Chrome Plated
      NZ03-1879-18 0.62 Included 0.5 Offset Optional 18 Hard Chrome Plated
      NZ03-1879-24 0.62 Included 0.5 Offset Optional 24 Hard Chrome Plated
      NZ03-1879-36 0.62 Included 0.5 Offset Optional 36 Hard Chrome Plated
      NZ03-2235-06 0.52 Included 0.33 Offset Optional 6 Hard Chrome Plated
      NZ03-2235-12 0.52 Included 0.33 Offset Optional 12 Hard Chrome Plated
      NZ03-2235-18 0.52 Included 0.33 Offset Optional 18 Hard Chrome Plated
      NZ03-2235-24 0.52 Included 0.33 Offset Optional 24 Hard Chrome Plated
      NZ03-2235-36 0.52 Included 0.33 Offset Optional 36 Hard Chrome Plated
      NZ03-2455-06 0.48 Included 0.33 Offset Optional 6 Hard Chrome Plated
      NZ03-2455-12 0.48 Included 0.33 Offset Optional 12 Hard Chrome Plated
      NZ03-2455-18 0.48 Included 0.33 Offset Optional 18 Hard Chrome Plated
      NZ03-2455-24 0.48 Included 0.33 Offset Optional 24 Hard Chrome Plated
      NZ03-2455-36 0.48 Included 0.33 Offset Optional 36 Hard Chrome Plated
      NZ03-2913-06 0.41 Included 0.33 Offset Optional 6 Hard Chrome Plated
      NZ03-2913-12 0.41 Included 0.33 Offset Optional 12 Hard Chrome Plated
      NZ03-2913-18 0.41 Included 0.33 Offset Optional 18 Hard Chrome Plated
      NZ03-2913-24 0.41 Included 0.33 Offset Optional 24 Hard Chrome Plated
      NZ03-2913-36 0.41 Included 0.33 Offset Optional 36 Hard Chrome Plated
    • Model Number Capacity (lbs) Lifting Speed at Rated Load (in/s) Limit Switch Motor (HP) Motor Position Potentiometer Stroke Length (in) Translating Tube Material
      NL03-4098-06 0.29 Included 0.25 Right Angle Optional 6 Hard Chrome Plated
      NL03-4098-12 0.29 Included 0.25 Right Angle Optional 12 Hard Chrome Plated
      NL03-4098-18 0.29 Included 0.25 Right Angle Optional 18 Hard Chrome Plated
      NL03-4098-24 0.29 Included 0.25 Right Angle Optional 24 Hard Chrome Plated
      NL03-4098-36 0.29 Included 0.25 Right Angle Optional 36 Hard Chrome Plated
      NL03-4767-06 0.25 Included 0.25 Right Angle Optional 6 Hard Chrome Plated
      NL03-4767-12 0.25 Included 0.25 Right Angle Optional 12 Hard Chrome Plated
      NL03-4767-18 0.25 Included 0.25 Right Angle Optional 18 Hard Chrome Plated
      NL03-4767-24 0.25 Included 0.25 Right Angle Optional 24 Hard Chrome Plated
      NL03-4767-36 0.25 Included 0.25 Right Angle Optional 36 Hard Chrome Plated
      NU03-10098-06 7 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-10098-12 7 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-10098-18 7 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-10098-24 7 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-10098-36 7 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NU03-10407-06 6.7 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-10407-12 6.7 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-10407-18 6.7 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-10407-24 6.7 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-10407-36 6.7 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NU03-12751-06 5.5 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-12751-12 5.5 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-12751-18 5.5 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-12751-24 5.5 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-12751-36 5.5 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NU03-6383-06 11 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-6383-12 11 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-6383-18 11 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-6383-24 11 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-6383-36 11 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NU03-6967-06 10.1 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-6967-12 10.1 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-6967-18 10.1 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-6967-24 10.1 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-6967-36 10.1 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NU03-8242-06 8.5 Included 0.16 Parallel Optional 6 Hard Chrome Plated
      NU03-8242-12 8.5 Included 0.16 Parallel Optional 12 Hard Chrome Plated
      NU03-8242-18 8.5 Included 0.16 Parallel Optional 18 Hard Chrome Plated
      NU03-8242-24 8.5 Included 0.16 Parallel Optional 24 Hard Chrome Plated
      NU03-8242-36 8.5 Included 0.16 Parallel Optional 36 Hard Chrome Plated
      NZ03-3181-06 0.37 Included 0.33 Offset Optional 6 Hard Chrome Plated
      NZ03-3181-12 0.37 Included 0.33 Offset Optional 12 Hard Chrome Plated
      NZ03-3181-18 0.37 Included 0.33 Offset Optional 18 Hard Chrome Plated
      NZ03-3181-24 0.37 Included 0.33 Offset Optional 24 Hard Chrome Plated
      NZ03-3181-36 0.37 Included 0.33 Offset Optional 36 Hard Chrome Plated
      NZ03-3480-06 0.35 Included 0.33 Offset Optional 6 Hard Chrome Plated
      NZ03-3480-12 0.35 Included 0.33 Offset Optional 12 Hard Chrome Plated
      NZ03-3480-18 0.35 Included 0.33 Offset Optional 18 Hard Chrome Plated
      NZ03-3480-24 0.35 Included 0.33 Offset Optional 24 Hard Chrome Plated
      NZ03-3480-36 0.35 Included 0.33 Offset Optional 36 Hard Chrome Plated
      NZ03-3773-06 0.31 Included 0.33 Offset Optional 6 Hard Chrome Plated
      NZ03-3773-12 0.31 Included 0.33 Offset Optional 12 Hard Chrome Plated
      NZ03-3773-18 0.31 Included 0.33 Offset Optional 18 Hard Chrome Plated
      NZ03-3773-24 0.31 Included 0.33 Offset Optional 24 Hard Chrome Plated
      NZ03-3773-36 0.31 Included 0.33 Offset Optional 36 Hard Chrome Plated
      NZ03-4185-06 0.28 Included 0.25 Offset Optional 6 Hard Chrome Plated
      NZ03-4185-12 0.28 Included 0.25 Offset Optional 12 Hard Chrome Plated
      NZ03-4185-18 0.28 Included 0.25 Offset Optional 18 Hard Chrome Plated
      NZ03-4185-24 0.28 Included 0.25 Offset Optional 24 Hard Chrome Plated
      NZ03-4185-36 0.28 Included 0.25 Offset Optional 36 Hard Chrome Plated
      NZ03-4965-06 0.24 Included 0.25 Offset Optional 6 Hard Chrome Plated
      NZ03-4965-12 0.24 Included 0.25 Offset Optional 12 Hard Chrome Plated
      NZ03-4965-18 0.24 Included 0.25 Offset Optional 18 Hard Chrome Plated
      NZ03-4965-24 0.24 Included 0.25 Offset Optional 24 Hard Chrome Plated
      NZ03-4965-36 0.24 Included 0.25 Offset Optional 36 Hard Chrome Plated
      NZ03-5933-06 0.19 Included 0.25 Offset Optional 6 Hard Chrome Plated
      NZ03-5933-12 0.19 Included 0.25 Offset Optional 12 Hard Chrome Plated
      NZ03-5933-18 0.19 Included 0.25 Offset Optional 18 Hard Chrome Plated
      NZ03-5933-24 0.19 Included 0.25 Offset Optional 24 Hard Chrome Plated
      NZ03-5933-36 0.19 Included 0.25 Offset Optional 36 Hard Chrome Plated
      NZ03-8171-06 0.14 Included 0.16 Offset Optional 6 Hard Chrome Plated
      NZ03-8171-12 0.14 Included 0.16 Offset Optional 12 Hard Chrome Plated
      NZ03-8171-18 0.14 Included 0.16 Offset Optional 18 Hard Chrome Plated
      NZ03-8171-24 0.14 Included 0.16 Offset Optional 24 Hard Chrome Plated
      NZ03-8171-36 0.14 Included 0.16 Offset Optional 36 Hard Chrome Plated

Documents

Brochures & Catalogs

[Catalogs] Duff-Norton SuperCylinder Design Guide [Brochure] Duff-Norton Capabilities Brochure S1

Manuals & Supplements

[O&M Manual] SCN03 O&M Manual

Product & Data Sheets

[Product Sheet] SCN03 Product Sheet [Product Sheet] SCN03 Specs & Part Numbers [Product Sheet] SCN03 Specs & Part Numbers - Hazardous Rated

Drawings & Diagrams

[Dimension Input Drawing] SCN03 Dimensional Drawing - Offset Motor [Dimension Input Drawing] SCN03 Dimensional Drawing - Parallel Motor [Dimension Input Drawing] SCN03 Dimensional Drawing - Right Angle Motor [Dimension Input Drawing] SCN03 Dimensional Drawing - Parallel Motor - Hazardous Rated [Dimension Input Drawing] SCN03 Dimensional Drawing - Right Angle Motor - Hazardous Rated

Related Products

SCW02 & 03 Series Heavy Duty Linear Actuator - Parallel Motor

SCW02-03 Series - 2 & 3 Ton

2-ton and 3-ton cylinders with ball or acme screw offers speeds up to 119 in/min., stroke lengths up to 59 inches, and double clevis mounting.

SCD02-3-6 Image

SCD02, 03 & 06 Series - 500 to 3200 lbs

The SCD cylinder is guided at both ends by polymeric bearings and is capable of extremely high speeds.