Enrange WIC-2402™ Wireless CAN Module

The WIC-2402 wireless system provides dependable control and fast performance.

Features & Benefits

Magnetek’s WIC-2402 transceiver is a 2.4GHz wireless data system for connecting CAN-based devices without the need for interconnecting wires. The WIC-2402 system transmits and receives (transceives) all CAN messages present on the CAN-bus just as if they were connected with wires, providing dependable control and fast performance. The modules can be used with most existing systems without the need for programming changes. A basic system includes one server module, a client module, and all necessary hardware. Custom configurations are available to meet your specific requirements.

Simple in Challenging Places

  • Supports any type of Bosch 2.0b CAN network, including J1939, CAN Open, Device Net, Parker ICP, and more, with little or no programming
  • More efficient and dependable than cables over long runs and moving joints
  • Ideal for mobile applications that require access to stationary based CAN-bus networks
  • Increases reliability by removing the cable, a failure point within many systems
  • Sends data across areas where cables can be damaged or where running cable is not practical
  • Eliminates the need to use slip rings for communication

Flexible and Fast Performance

  • Configure which CAN message get transmitted wirelessly by setting message filters with RCP
  • Fast response time— messages are transmitted and received with less than 30 milliseconds latency
  • Wide operating voltage range of 9-36VDC
  • Communicates over long ranges, up to 1,500 feet
  • Reduces field service and maintenance costs
  • Features bright LED lights for diagnostics and system status
  • Rated NEMA 4 (IP66), sealed to withstand harsh mobile and industrial environments
  • Quick plug Deutsch connector makes integrating into the machine easy
  • Reliable in crowded RF bands with Frequency Hopping Spread Spectrum (FHSS) technology
  • Custom configurations available

Typical Applications

  • Make CAN-bus control modules mobile
  • Communicate to mobile machinery
  • Isolate controls for utility truck safety
  • Provide data feedback from excavator self-powered attachments
  • Transmit data feedback from sensors to CAN gauges

3 Easy Installation Steps for the Standard WIC-2402

  1. Cut CAN cable
  2. Connect CAN cable ends to the WIC-2402
  3. Power the WIC-2402 with 9-36VDC

No program setup required. It’s that easy!