Skip to main content
How To Buy

CMLA-D Series - 2000 Lbs

The CMLA-D Series 2000 lb. capacity, Ball screw linear actuator with IP66S protection rating and hardened gears, screws, and lifting nuts is a robust and reliable device designed for demanding industrial applications requiring accurate linear motion and high load capacity. The use of ball bearings minimizes friction, leading to smoother operation and higher energy efficiency compared to traditional lead screws.

Free Application Analysis

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features and Benefits

  • Multiple Capacity Ratings
    Four (4) available capacity ratings enable usage in a variety of applications
  • Sealed Bearings and High Quality Lubricants
    Eliminates the need for periodic maintenance
  • Precision Ball Screw Option
    Offers unmatched load speeds
  • Hardened Gears, Screws and Lifting Nuts
    Provide an enhanced service life that surpasses many competitive offerings
  • Overload Prevention
    Safety clutch aids in the prevention of damage due to accidental overload conditions
  • Environmental Protection
    IP66S protection rating enables application in the harshest environmental conditions, including those where washdown is required

FEATURES AND BENEFITS

Rated Load

Fully rated at 2000 lbs to handle dynamic loads both in compression and tension

Lifting Speeds

Lifting speeds up to 2 in/sec at rated load

Standard stroke lengths

3.9 in, 5.9 in, 11.8 in, 17.7 in, 23.6 in, and 29.5 in

Safety

Safety clutch aids in the prevention of damage due to accidental overload conditions

Motor Voltage

230/460 3-phase motor

Standard Brake

3-phase AC brake

Specifications

CMLA D Series 2000 lb Product Specifications
Capacitor Model Motor Max. Dynamic Load Max. Static Load Screw Gear Motor Power Amperage Lifting Speed Duty Cycle Capacitor Rating
# Type (lbs) N (lbs) N Type Ratio Volts Amps (in/s) mm/s (in/hr) m/hr mdf
192002122 AC (1500) 6700 (2250) 10,008 Trapezoid 17.2 115 8 (0.74) 18.8 (500) 12.7 90
192002121 AC (1500) 6700 (2250) 10,008 Trapezoid 17.2 230 4 (0.74) 18.8 (500) 12.7 25
192002122 AC (1500) 6700 (2250) 10,008 Ball 14.0 115 8.3 (1.45) 36.8 (900) 22.9 90
192002121 AC (1500) 6700 (2250) 10,008 Ball 14.0 230 4.4 (1.45) 36.8 (900) 22.9 25
192002122 AC (750)§ 3336 (2250) 10,008 Ball 6.9 115 8.3 (2.9) 73.7 (1800) 45.8 90
192002121 AC (750)§ 3336 (2250) 10,008 Ball 6.9 230 4.4 (2.9) 73.7 (1800) 45.8 25
§Double Speed - Lower ratio reduces rated load to 750 lbs.
Notes:
1. The correct capacitor mfd should be used for each model or the cylinder will not perform as rated.
2. Order Hard Start Kit 192036494 for applications where high starting torque is required (low temperature, high starting load)

Documents

Brochures & Catalogues

[Catalogs] Linear Actuator Design Guide

Product & Data Sheets

[Product Sheet] CMLA-D Product Sheet [Product Sheet] CMLA-D Specs and Part Numbers

Drawings & Diagrams

[Dimension Input Drawing] CMLA-D Dimensional Drawing