Products

Three Phase Jog Control Specifications

Motor Size	Voltage	Height	Width	Depth	Enclosure Mounting
Up to 10 HP	400 VAC/3 PH/60 Hz	20 Inches	16 Inches	6 Inches	Wall Mount
NOTE: Dimensions are the same for Momentary or Maintained controls. Dimensions shown are for standard jog controls with a single electric motor.

Three Phase Jog System Control Methods

Method 1 - Momentary Jog Controls

Press and hold the extend or retract pushbutton.
Control voltage is applied to the limit switch.
Control voltage from the limit switch energizes the motor starter.
The motor starter supplies three phase power to the motor. The motor will run clockwise or counterclockwise to extend or retract the actuator.

Releasing the extend or retract pushbutton de-energizes the motor starter stopping the motor and actuator.
If the normally closed limit switch is activated the motor starter will be de-energized stopping the motor and actuator.

Method 2 - Maintained Jog Controls

Press and release the extend or retract pushbutton.
Control voltage is applied to the limit switch.
Control voltage from the limit switch passes through the stop pushbutton and energizes the motor starter.
The motor starter supplies three phase power to the motor. The motor will run clockwise or counterclockwise to extend or retract the actuator.

Pressing the stop pushbutton de-energizes the motor starter stopping the motor and actuator.
If the normally closed limit switch is activated the motor starter will be de-energized stopping the motor and actuator.