Find a contact

Camlok® CH Horizontal Plate Clamps

Lifting Clamps

Capacity: 1000 - 20000 kg/pair
The CH Horizontal Lifting Gear, when used in pairs, is well-suited for horizontal transport of individual and bundled plates. The clamp is not suited for thin plates that have a tendency to sag during transport. It is normally used in combination with a two-legged chain sling.

Buy Now

Features & Benefits

FEATURES and BENEFITS:

  • The capacity (working load limit) applies to a pair of lifting clamps.
  • The CH1 clamp is fitted with a single jaw. Serrated teeth on the jaws are a standard option. Clamps have smooth jaws so they can be used on all types of material
  • CH clamps are designed for loading process machines and to lift and transport sheet steel plates in the horizontal position
  • Clamps are suitable for lifting one plate at a time, or bundles of plates provided the plates are the same width, have straight square sides, and are thicker than 10% of the maximum jaw capacity of the clamp
  • The smooth jaws can be replaced with serrated, hardened steel teeth and used on material up to 300 Brinell (32HRc)
  • Design factor 4:1

 

INFO:

  • CH clamps should never be side loaded.
  • Designed to be used with 2 legged slings. Sold in pairs.