Radio Remote Controls For Hazardous Locations

Magnetek offers several remote controls ideal for hazardous or potentially explosive locations. XLTX and MLTX2 transmitters are ATEX and IECEx approved for EX Zone 0, Zone 1, and Zone 2 environments, while the MLTX is intended for applications requiring non-incendive ratings to comply with North American requirements. Flex EX and Flex Pro radios are ATEX and IECEx approved for EX Zone 2 environments.

Características y ventajas

The flexibility of a remote control system allows the user to operate farther away from a dangerous situation than wired alternatives. These innovative radio remote controls can be applied to a variety of applications, including petrochemical operations, chemical plants, plane hangars, and industrial painting.

Rugged Design Combines with Innovative Technology

  • Super-tough nylon is made to withstand shock 
  • Military grade auxiliary function switches 
  • Access code system provides peace-of-mind, as the system only operates the intended equipment 
  • Designed to minimize power consumption, providing one of the longest life batteries in the industry today 
  • Available in unlicensed 433MHz and 900 MHz (XLTX and MLTX2 only)
  • Radio Control Programmer (RCP) with USB/IR Adapter option available (XLTX and MLTX2 only)


Select a Transmitter with the Unique Features to Fit Your Application Needs.

  • XLTX Offers the Most Options to Configure a Flexible Solution
  • ATEX Approval: II 1 G Ex ia IIC T3/T4 Ga 
  • IECEx Approval: Ex ia IIC T3/T4 Ga 
  • Graphic display with system diagnostics including battery life, signal strength, and warning symbols
  • Available two-way RF for applications requiring feedback of CAN-bus parameters, alarms, and command confirmation
  • Choose up to 8 levers, 4 joysticks, or any combination 
  • Numerous combinations of toggles, selector switches, and potentiometers 
  • Available with detented or stepless controls  
  • Spare battery compartment with extra battery to avoid downtime


MLTX2 Provides an Ergonomic, Lightweight Choice for Hazardous Locations

  • ATEX Approval: II 1 G Ex ia IIC T3/T4 Ga 
  • IECEx Approval: Ex ia IIC T3/T4 Ga 
  • Available two-way RF for applications requiring feedback of CAN-bus parameters, alarms, and command confirmation
  • Choose up to 7 levers, 3 joysticks, or any combination 
  • Numerous combinations of toggles, selector switches, and potentiometers 
  • Available with detented or stepless controls 
  • Graphic display with system diagnostics including battery life, signal strength, and warning symbols


MLTX Delivers a Cost-Effective Option to Meet North American Requirements

  • Non-incendive transmitter for use in hazardous locations requiring ISA 12.12.01 Class I and Class II, Division 2, Group A, B, C, D, E, F and G 
  • Choose up to 7 levers or 2 joysticks 
  • Available proportional, 1, 2, 3, or 5 speeds in a non-detent lever or joystick 
  • Rechargeable NiMH battery pack standard 


Flex ProTM Offers Flexible Proportional Control in a Handheld

  • Available with ATEX and IECEx approvals for Zone 2 applications
  • ATEX Approval: II 3 G EX ic IIC T3/T4 Gc
  • IECEx Approval: EX ic IIC T3/T4 Gc
  • Choose 8 or 12 proportional button configurations with precise control for smooth operation
  • Rated NEMA 4 (IP66), sealed to withstand harsh, industrial environments
  • Informative LEDs provide diagnostic and system status
  • Rugged, tough nylon housing is made to withstand shock; protective cases and accessories available for harsh environments
  • I-Chip module makes Flex a universal transmitter that can be programmed in the field


Flex EX is a Rugged Alternative to Hardwired Pendants 

  • Available with ATEX and IECEx approvals for Zone 2 applications* (8 and 12-button only)
  • ATEX Approval: II 3 G EX ic IIC T3/T4 Gc
  • IECEx Approval: EX ic IIC T3/T4 Gc
  • IP66 rated fully sealed transmitter adn receiver enclosures provide you with confidence and protection in the harshest indoor or outdoor environments
  • Equipped with more than 200 programmable functions to suit all types of applications
  • Advanced synthesized RF controls with 62 user-programmable channels add flexibility to frequency management in the field
  • I-Chip module makes Flex a universal transmitter that can be programmed in the field
  • Available in pre-engineered or engineered configurations

*Available on first generation Flex EX only


Receivers

Combine a transmitter with one of Magnetek's receivers for a complete radio control system.  Receivers can be put into an explosion-proof enclosure which meets NEMA 7 or NEMA 9 standards for added safety.