Flex Fit Transmitter Photo
Flex Fit Transmitter Photo

Flex Fit™ Transmitter

Flex Fit Transmitter Photo
Flex Fit Transmitter Photo

The ergonomic Flex Fit transmitter is available in 4-, 6-, 8-, and 12-button models and packaged with corresponding receivers for complete radio control.

Features and Benefits

IDEAL FOR THE FOLLOWING APPLICATIONS:

WIRELESS HYDRAULIC CONTROL FEATURES & BENEFITS

FLEXIBLE DESIGN

Transmitters are available in 4-, 6-, 8-, and 12-button designs with single-step control and can be configured to best suit the functionality requirements of your project. With Flex Fit, you do not receive transmitters with extra or cabbed buttons. Transmitters are rated NEMA 4 (IP66), sealed to withstand harsh indoor or outdoor environments. Flex Fit comes standard with two standard AA alkaline batteries. The transmitter is equipped with charging contacts to maintain its environmental protections. If installing with optional AA NiMH rechargeable batteries, transmitters can be recharged in a convenient charging cradle.

INCREASED UPTIME WITH EASY SETUP

Flex Fit hydraulic remote control systems are packaged with a transmitter and a receiver, which are quick and easy to replace in the event a component is dropped. Spare transmitters can be put into operation immediately, greatly reducing the amount of time equipment is inoperable. Wireless pairing capabilities allow information and settings to be easily transferred between two transmitters or a transmitter/receiver system. This reduces the time it takes for new systems to get up and running and minimizes inventory of spare parts.

INCREASED SAFETY

Wireless controls allow operators to manage equipment farther away from a potentially dangerous situation as compared to hardwired stations and pendants. Operators have freedom to move away from hazards or the load itself and can easily position themselves at better vantage points.

COMFORTABLY CONTOURED AND DURABLE

With a comfortable feel, the Flex Fit is ergonomic and reduces fatigue to help ensure accurate control and safe operation of equipment throughout a shift. The force required to actuate and maintain a mechanical lift with Flex Fit is less than what is required with membrane-style transmitters. Flex Fit is compact, lightweight, and is available with optional accessories, such as protective rubber transmitter boots and a retractable belt clip, for added protection and flexibility.

Options

STANDARD MODELS

Flex Fit systems come standard with mobile hydraulic single-point, single-step transmitters. Standard labels are included. Custom labeling available upon request.

  • Construction: Fiberglass reinforced nylonrs
  • Environmental Protection: NEMA 4/IP66
  • Functions: 4, 6, 8, and 12 buttons, single speedrs
  • Frequencies: Part 15 License Free, 433-434 MHz
  • Operating Range: Up to 300 feet (90 m)rs
  • Diagnostics: On-board diagnostics with LED indicators for transmitter status
  • Battery Type:
    • Two “AA” Alkaline non-rechargeable standard
    • Two “AA” NiMH rechargeable optional

 

APPROVALS

  • EMC: EN 301 489-1 + EN 301 489-3
  • R&TTE: EN 300 220-1 V2.3.1 + EN 300 220-2 V2.3.1
  • Safety: EN 60950 + A1 + A11 + A12
  • Machinery: EN 60204, EN 13557 + A1
                             EN ISO 13849-1 (PL=d), EN 60529 (IP66)

 

RECEIVERS

Flex Fit transmitters easily pair with Magnetek receivers in the field to get your application up and running quickly. Designed to operate in either indoor or outdoor environments, IP66-rated Magnetek receivers are easy to adjust and install. Onboard diagnostic and output LEDs provide useful system status information for easy troubleshooting.

MRX
Used with the 4-, 6-, and 8-button Flex Fit transmitters, the spacesaving, lightweight MRX receiver can be mounted on the control panel or the body of a hoist without causing system imbalance.

  • Available Power Supplies: 9-36 VDC, 24-48 VAC, and 48-240 VAC
  • Dimensions: 4.72” (L) x 5.54” (W) x 2.17” (H)
                          120 mm x 90 mm x 55 mm
  • Weight: 900 kg/2.0 lb. (including output cable)

 

FLEX 12
The feature-rich Flex 12 receiver, which pairs with the Flex Fit 12-button transmitter, offers additional control capabilities and options, including functions such as lights, magnet controls, and powered lifting devices.

  • Dimensions: 10.23” (L) x 8.03” (W) x 3.27” (H)
                          260 mm x 204 mm x 83 mm
  • Weight: 2.5 kg/5.5 lb. (including output cable)

Magnetek Support Services

Over 150 years of combined experience means Magnetek has the expertise to skillfully serve your application needs before, during, and after we complete a project. With products designed to maximize the performance of your material handling system, start-up and field assistance, programs designed to train employees on optimal product usage, and quick, value-driven product repair and recertification, Magnetek is able to assist you with the highest level of service.

Spectrum-Analysis-585-329