CMLA-A Linear Industrial Linear Actuator
CMLA-A Linear Industrial Linear Actuator

CMLA A Series - 500 lbs

CMLA-A Linear Industrial Linear Actuator
CMLA-A Linear Industrial Linear Actuator

VOLTAGE: 115 or 230 VAC
SCREW TYPE: Ball screw or trapezoid
STANDARD STROKE: 100 to 600 mm
SPEED: 14.2to 28.5 mm/s
TEMPERATURE RANGE: -20ºC to 65ºC
ENVIRONMENT RATING: IP66S protection

Features and Benefits

FEATURES AND BENEFITS

Rated Load

Fully rated at 500 lbs to handle dynamic loads both in compression and tension

Lifting Speed

Up to 1.5 in/sec at rated load

Standard stroke lengths

3.9 in , 5.9 in, 11.8 in, 17.7 in, and 23.6 in

Safety

Safety clutch aids in the prevention of damage due to accidental overload conditions

Options

OPTIONS

Screw Models

Both ball and trapezoidal screw models available

Motor Voltages

115Vac or 230Vac single phase

Electric brake

Standard on ball screw models

Feedback

Position feedback potentiometer

Limit Switch

Adjustable limit switches

Specifications

CMLA A Series 500 lb Product Specifications

Capacitor Model Motor Max. Dynamic Load Max. Static Load Screw Gear Motor Power Amperage Lifting Speed Duty Cycle Capacitor Rating
# Type (lbs) N (lbs) N Type Ratio Volts Amps (in/s) mm/s (in/hr) m/hr mdf
SK6405-7-13 AC (500) 2200 (750) 3336 Trapezoid 11.5 115 2.3 (0.71) 18.0 (810) 20.6 35
SK6405-7-10 AC (500) 2200 (750) 3336 Trapezoid 11.5 230 1.4 (0.71) 18.0 (810) 20.6 10
SK6405-7-13 AC (500) 2200 (750) 3336 Ball 6.5 115 2.4 (1.5) 38.1 (1200) 30.5 35
SK6405-7-10 AC (500) 2200 (750) 3336 Ball 6.5 230 1.5 (1.5) 38.1 (1200) 30.5 10
Notes:
1. The correct capacitor mfd should be used for each model or the cylinder will not perform as rated.
2. Order Hard Start Kit 192036494 for applications where high starting torque is required (low temperature, high starting load)

Models

CMLA A Series 500 lb Dimensions

CMLA-A-500.jpg